# Copyright (C) 2020 Guillaume Collic
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import math
from boxes import Boxes
[docs]
class PaperBox(Boxes):
"""
Box made of paper, with lid.
"""
ui_group = "Misc"
description = """
This box is made of paper.
There is marks in the "outside leftover paper" to help see where to fold
(cutting with tabs helps use them). The cut is very precise, and could be too tight if misaligned when glued. A plywood box (such as a simple TypeTray) of the same size is a great guide during folding and gluing. Just fold the box against it. Accurate quick and easy.
A paper creaser (or bone folder) is also useful.
"""
def __init__(self) -> None:
Boxes.__init__(self)
self.buildArgParser("x", "y", "h")
self.argparser.add_argument(
"--design",
action="store",
type=str,
default="automatic",
choices=("automatic", "widebox", "tuckbox"),
help="different design for paper consumption optimization. The tuckbox also has locking cut for its lid.",
)
self.argparser.add_argument(
"--lid_height",
type=float,
default=15,
help="Height of the lid (part which goes inside the box)",
)
self.argparser.add_argument(
"--lid_radius",
type=float,
default=7,
help="Angle, in radius, of the round corner of the lid",
)
self.argparser.add_argument(
"--lid_sides",
type=float,
default=20,
help="Width of the two sides upon which goes the lid",
)
self.argparser.add_argument(
"--margin",
type=float,
default=0,
help="Margin for the glued sides",
)
self.argparser.add_argument(
"--mark_length",
type=float,
default=1.5,
help="Length of the folding outside mark",
)
self.argparser.add_argument(
"--tab_angle_rad",
type=float,
default=math.atan(2 / 25),
help="Angle (in radian) of the sides which are to be glued inside the box",
)
self.argparser.add_argument(
"--finger_hole_diameter",
type=float,
default=15,
help="Diameter of the hole to help catch the lid",
)
def render(self):
if self.design == "automatic":
self.design = "tuckbox" if self.h > self.y else "widebox"
path = (
self.tuckbox(self.x, self.y, self.h)
if self.design == "tuckbox"
else self.widebox(self.x, self.y, self.h)
)
self.polyline(*path)
def tuckbox(self, width, length, height):
lid_cut_length = min(10, length / 2, width / 5)
half_side = (
self.mark(self.mark_length)
+ [
0,
90,
]
+ self.ear_description(length, lid_cut_length)
+ [
0,
-90,
length,
0,
]
+ self.lid_cut(lid_cut_length)
+ self.lid_tab(width - 2 * self.thickness)
+ [0]
+ self.lid_cut(lid_cut_length, reverse=True)
+ [
length,
-90,
]
+ self.ear_description(length, lid_cut_length, reverse=True)
+ self.mark(self.mark_length)
)
return (
[height, 0]
+ half_side
+ self.side_with_finger_hole(width, self.finger_hole_diameter)
+ self.mark(self.mark_length)
+ [
0,
90,
]
+ self.tab_description(length - self.margin - self.thickness, height)
+ [
0,
90,
]
+ self.mark(self.mark_length)
+ [width]
+ list(reversed(half_side))
)
def widebox(self, width, length, height):
half_side = (
self.mark(self.mark_length)
+ [
0,
90,
]
+ self.tab_description(length / 2 - self.margin, height)
+ [
0,
-90,
height,
0,
]
+ self.mark(self.mark_length)
+ [
0,
90,
]
+ self.tab_description(self.lid_sides, length)
+ [
0,
90,
]
+ self.mark(self.mark_length)
+ [
height,
-90,
]
+ self.tab_description(length / 2 - self.margin, height)
+ [
length,
0,
]
+ self.mark(self.mark_length)
)
return (
self.side_with_finger_hole(width, self.finger_hole_diameter)
+ half_side
+ self.lid_tab(width)
+ list(reversed(half_side))
)
def lid_tab(self, width):
return [
self.lid_height - self.lid_radius,
(90, self.lid_radius),
width - 2 * self.lid_radius,
(90, self.lid_radius),
self.lid_height - self.lid_radius,
]
def mark(self, length):
if length == 0:
return []
return [
0,
-90,
length,
180,
length,
-90,
]
def lid_cut(self, length, reverse=False):
path = [
90,
length + self.thickness,
-180,
length,
90,
]
return [0] + (list(reversed(path)) if reverse else path)
def side_with_finger_hole(self, width, finger_hole_diameter):
half_width = (width - finger_hole_diameter) / 2
return [
half_width,
90,
0,
(-180, finger_hole_diameter / 2),
0,
90,
half_width,
0,
]
def tab_description(self, height, width):
deg = math.degrees(self.tab_angle_rad)
side = height / math.cos(self.tab_angle_rad)
end_width = width - 2 * height * math.tan(self.tab_angle_rad)
return [
0,
deg - 90,
side,
90 - deg,
end_width,
90 - deg,
side,
deg - 90,
]
def ear_description(self, length, lid_cut_length, reverse=False):
ear_depth = max(lid_cut_length, self.lid_height)
radius = min(self.lid_radius, ear_depth - lid_cut_length)
start_margin = self.thickness
end_margin = 2 * self.burn
path = [
start_margin,
-90,
lid_cut_length,
90,
0,
(-90, radius),
0,
90,
length - radius - start_margin - end_margin,
90,
ear_depth,
-90,
end_margin,
]
return (list(reversed(path)) if reverse else path) + [0]
